17x8.5 wheels with +38 offset - AcuraLegend.Org - The Acura Legend Forum for All Generations of the Honda / Acura Legend; 1986 to Present

stillak · 08-20-2022, 01:54 AM

Hello,

I am wanting wheels which are 17x8.5 and only available with +38 offset.

I have a 91 coupe.

What are my options for getting them to fit in the fenders? I hate negative camber and still want meaty tires for ride quality.

94LegendaryAcuraGS · 08-22-2022, 10:48 AM

Quote:

Originally Posted by stillak

Hello,

I am wanting wheels which are 17x8.5 and only available with +38 offset.

I have a 91 coupe.

What are my options for getting them to fit in the fenders? I hate negative camber and still want meaty tires for ride quality.

You would have to roll the fenders pretty aggressively and those wheels are still likely to "poke out" from the fenders. I have a set of 17 X 7.5 with a +38 offset and they do fit in the rear of my rolled fender coupe but the fronts poke out just a little bit. I have a set of 18 X 8 wit a +38 offset to upgrade to and already know those are going to have a bit on the front sticking out and that may happen even if I go down to just a 215/40/18 tire like I have on my sedan verses the current 225 width tire I have on the coupe now. The front track of the car is a tad bit wider than the rear and those nice stock fender flares up front do a MARVELOUS job of fooling the brain into not noticing.

stillak · 08-25-2022, 02:44 AM

so you're basically saying its achievable.

I plan to lower the car with H&R springs and roll the fenders as much as possible.

However, I'm not a fan of thin tires and negative camber.

PS. Can anyone share pictures of an 8.5" or 8" wheel with +38 offset?

Hockeyman · 08-25-2022, 09:04 AM

Not sure if helpful, but i run 17x8 et44 up front and 17x9 et49 on my coupe. Pics on my IG ka8_blake

stillak · 08-28-2022, 10:29 PM

Quote:

Originally Posted by Hockeyman

Not sure if helpful, but i run 17x8 et44 up front and 17x9 et49 on my coupe. Pics on my IG ka8_blake

Did you pull out the fenders/roll them? and how much was your car lowered? Is it H&R springs?

Hockeyman · 08-29-2022, 07:24 AM

Quote:

Originally Posted by stillak

Did you pull out the fenders/roll them? and how much was your car lowered? Is it H&R springs?

fenders are stock, car is on bags

08-20-2022, 01:54 AM	#1
stillak Junior Member Join Date: Aug 2022 Posts: 7	17x8.5 wheels with +38 offset Hello, I am wanting wheels which are 17x8.5 and only available with +38 offset. I have a 91 coupe. What are my options for getting them to fit in the fenders? I hate negative camber and still want meaty tires for ride quality.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
17x8 +35 offset...	Francisco	Wheels & Tires	3	01-24-2014 12:43 PM
FS: Work VS-SD 17x8 / 5x114.3 / +36 Offset	Boondock Saint	Non-OEM Parts	16	08-01-2010 09:17 PM
Will 17x8.5" w/65 offset fit on rear of G2 Coupe?	MemberLS02	Wheels & Tires	8	12-13-2009 08:20 AM
FS: testing waters - 2005 TL 17x8 wheels with 235/45/17 Nexen 3000 tires	kotetu	OEM Parts	16	07-22-2009 12:00 PM

08-25-2022, 02:44 AM	#3
stillak Junior Member Join Date: Aug 2022 Posts: 7	so you're basically saying its achievable. I plan to lower the car with H&R springs and roll the fenders as much as possible. However, I'm not a fan of thin tires and negative camber. PS. Can anyone share pictures of an 8.5" or 8" wheel with +38 offset?

08-25-2022, 09:04 AM	#4
Hockeyman Member Join Date: Dec 2012 Location: DFW Posts: 212 '07 CHEVROLET COBALT '94 ACURA Legend Coupe LS Real Name: Blake	Not sure if helpful, but i run 17x8 et44 up front and 17x9 et49 on my coupe. Pics on my IG ka8_blake

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)