|
09-26-2015, 04:01 PM
|
#1 |
|
Junior Member
Join Date: Mar 2014
Location: Pomona,CA
Posts: 90
 |
tl-s hub boring
Seen a post or two where other members have bored out tl-s for their legends. I didn't see or couldn't
Find the size of tool they used and where someone could buy one. From what I measured was that a 6mm or 25/64 rabbet tool would be the one I need, but I can't find one At the hardware stores or even online. I bought a set for 135 with tires at a pick a part junkyard that are in great shape , due to being spraybombed Like 3 times with different colors . I would like some info please |
|
|
|
09-26-2015, 06:32 PM
|
#2 |
|
S*L*O*W
Join Date: Aug 2010
Location: Atlanta, GA
Posts: 3,334
Real Name: Rich
|
Search "hub bore" and select "show posts"
It looks like 70.1 is a perfect fit and 70.2 is a "safe" bore. You will find many posts going from those measurements all the way up to 73 which leaves huge margin for error. Some people have done it by hand but most use a wheel shop to do a really nice job. I have a set of 16" RSX wheels that I need to get bored and resprayed. rich
__________________
 * Your smoking 3.2 engine is probably ok... replace your valve guide seals before condemning it! |
|
|
|
|
09-26-2015, 08:34 PM
|
#3 |
|
grill master
Join Date: Jun 2009
Location: long island NY
Posts: 4,521
Real Name: brian
 |
70.1 is the correct size some people have done 70.2 cause they too lazy to remove the rust off the hub
__________________
|
|
|
|
|
09-27-2015, 03:30 AM
|
#4 |
|
Junior Member
Join Date: Mar 2014
Location: Pomona,CA
Posts: 90
|
Tl-s wheels are 64.1 and require a 70.1 bore to fit the legend hub. So for me to make that cut I would need to cut 6mm in a
Single cut or do a two cut in 3mm. I seen listed 6mm 25/64 in sae as well as 3mm cutting bit but I get confused on all the options My router is a craftsman and unsure the shank size |
|
|
|
|
09-27-2015, 10:50 AM
|
#5 | |
|
S*L*O*W
Join Date: Aug 2010
Location: Atlanta, GA
Posts: 3,334
Real Name: Rich
|
Quote:
rich
__________________
* Your smoking 3.2 engine is probably ok... replace your valve guide seals before condemning it! |
|
|
|
|
|
10-11-2015, 03:09 PM
|
#6 |
|
Senior Member
Join Date: May 2011
Location: Los Angeles, CA
Posts: 936
Real Name: Bernard
|
OP if you ever found a shop willing to do it let me know. Haven't found one anywhere in socal!
|
|
|
|
 |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| OC Wheel Boring | dubwubwubz | SoCal | 5 | 03-18-2015 11:25 PM |
| Wheel boring? | dwiz3443 | Wheels & Tires | 2 | 05-27-2013 06:26 PM |
| GTA Rim Boring | Juicemon | Canada | 0 | 04-17-2013 01:39 PM |
| Could be boring for some... | pnoye2 | The Water Cooler | 10 | 02-27-2013 11:02 PM |
| Work is boring... | 89HondaLegend | The Water Cooler | 22 | 10-27-2009 11:46 PM |
Linear Mode
