Forward Front Control Arm Bushing Discussion - Page 9 - AcuraLegend.Org - The Acura Legend Forum for All Generations of the Honda / Acura Legend; 1986 to Present

Guario · 10-20-2014, 05:35 PM

Quote:

Originally Posted by Qs91Coupe

So you have done this Guario?

Yes. And it works too. But you need to modify the bushing.

chompsterlegend · 10-25-2014, 08:26 PM

There's two bushings and they look a bit different from each other. The one shown on the pic is for the rear part. What about the one towards the bumper?

Guario · 10-25-2014, 10:25 PM

These are the radius arm bushings, housed under the forward cross member. A Honda bushing is modified to fit the unique bushing found in our cars. One of the protruding ends needs to be cut-off, then a conic bevel must be provided at that end.

chompsterlegend · 10-26-2014, 01:30 PM

Quote:

Originally Posted by Guario

These are the radius arm bushings, housed under the forward cross member. A Honda bushing is modified to fit the unique bushing found in our cars. One of the protruding ends needs to be cut-off, then a conic bevel must be provided at that end.

I see..

chiefwilson · 05-06-2017, 08:46 PM

Quote:

Originally Posted by Jonslegend

Success!!!

hyundai sonata bushings installed. Now just gotta modify a lil more and were golden

How did you remove the old bushing? Did you have to create a special tool to push out via press machine?

Midgez95KA7 · 02-22-2020, 06:59 AM

Had one of these bushings bust on me 2 ish yrs ago while doing 80mph ish on I-24 in Nashville.
blu literally without warning went across three lanes on this interstate and only our highest source made sure there were no other vehicles in those Lanes.
Otherwise I may not be typing this right now. Bad Morbid Midge.
All this to say that Jon's and Lou's idea worked with the Sonata bushings.

And I remember my mechanic buddy putting them in the refrigerator freezer for a while *shrugs but it did the trick.

Sent from my SM-G960U using Tapatalk

srqlegend · 04-15-2020, 07:07 PM

Quote:

Originally Posted by Legend37

From post #33 above..

1999~2005 hyundai sonata bush.
part # 54584-38100

Here's a link:
https://www.hyundaioemparts.com/oem-...ght-5458438100

Alperovich · 04-16-2020, 06:43 AM

Quote:

Originally Posted by srqlegend

Here's a link:
https://www.hyundaioemparts.com/oem-...ght-5458438100

easier fix now is just one of these:

https://www.ebay.com/itm/2pcSet-Moun...EAAOSwX0VdLQY2

srqlegend · 04-17-2020, 09:58 PM

nice!

Midgez95KA7 · 09-14-2021, 03:59 PM

Quote:

Originally Posted by Alperovich

easier fix now is just one of these:

https://www.ebay.com/itm/2pcSet-Moun...EAAOSwX0VdLQY2

Super late to the party, and unable to back to my past, but sure wish I could. Good find Alex

02-22-2020, 06:59 AM	#86
Midgez95KA7 "blu"Goofyowner Join Date: Jun 2013 Location: Nashville, TN Posts: 290 '95 ACURA Legend '95 ACURA Legend '95 ACURA Legend '95 ACURA Legend Sedan L Real Name: "Midge"	Had one of these bushings bust on me 2 ish yrs ago while doing 80mph ish on I-24 in Nashville. blu literally without warning went across three lanes on this interstate and only our highest source made sure there were no other vehicles in those Lanes. Otherwise I may not be typing this right now. Bad Morbid Midge. All this to say that Jon's and Lou's idea worked with the Sonata bushings. And I remember my mechanic buddy putting them in the refrigerator freezer for a while *shrugs but it did the trick. Sent from my SM-G960U using Tapatalk __________________ blu..."kickin'tail"

04-17-2020, 09:58 PM	#89
srqlegend Member Join Date: Jul 2016 Location: NorCal Posts: 114 '86 PEUGEOT 505 '94 ACURA Legend Sedan GS	nice! __________________ ====== Let's bite off more than we can chew ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Driver side upper Control arm	Roger	OEM Parts	3	10-24-2009 01:13 PM
Front Upper Arm torque specs	Roger	2nd Gen. Legend General Discussion	0	07-19-2009 07:47 AM
Right upper A control arm	Roger	OEM Parts	0	07-12-2009 09:17 AM
New rear control arm creeking	Roger	2nd Gen. Legend General Discussion	0	06-29-2009 06:27 PM
Rear control arm custom bushings	lgnd	2nd Gen. Legend Performance Enhancements	8	06-19-2009 11:52 AM

10-25-2014, 08:26 PM	#82
chompsterlegend Member Join Date: Feb 2013 Location: CA Posts: 231 Real Name: Chompster	There's two bushings and they look a bit different from each other. The one shown on the pic is for the rear part. What about the one towards the bumper?

10-25-2014, 10:25 PM	#83
Guario Junior Member Join Date: Sep 2013 Posts: 75	These are the radius arm bushings, housed under the forward cross member. A Honda bushing is modified to fit the unique bushing found in our cars. One of the protruding ends needs to be cut-off, then a conic bevel must be provided at that end.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)